How to fix error 404 in tally ?

manpreet Best Answer 2 years ago

How to fix error 404 in tally ?

manpreet 2 years ago

Hi Kamal,

              This error occurs when Tally is unable to connect to the configured Tally Gateway Server and Port. You can follow these steps to reslove this error:

• Check if the Server name/IP address specified in the Configure Existing License screen is correct.
• Alternatively, press F2 in the Configure Existing License screen to select a Tally Gateway Server.
• Check if the Tally Gateway Server is installed on the computer specified in the configuration.
• Allow Tally.ERP 9 and Tally Gateway Server through Windows Firewall
• Go to Control Panel and check if the LAN connection is enabled or disabled on your computer. If the connection is disabled, enable it.
• Check if your LAN cable is connected to both your computer and the network wall socket.
• Open Command Prompt on the computer where the Tally Gateway Server is installed and run the command netstat -a . If the specified port gets listed with the State as Listening , then the Tally Gateway Server is receiving requests from the port.