MAIN tunnel and connected to the centre line of the main tunnel with cross cuts at many points.These are used in locations, where HORIZONTAL APPROACH to the centreline of the tunnel is shorter than deep vertical shaft, which will obtain additional faces for attack. The cross-section of the pilot tunnel usually measures about 2.4 m × 2.4 m.The pilot tunnel offers the following advantages:It helps in removing the muck from the main tunnel quickly.It helps in providing proper ventilation and lighting in the main tunnel.Explanation:From the above figure,It is clear that the cross cuts are provided to CONNECT pilot tunnel with main tunnel faces. Hence faces for attacking excavation and construction of tunnels are OPENED by constructing pilot tunnels.Hence, Assertion (A) is correct.As these tunnels are provided at locations when horizontal approach to the centre line of tunnel is shorter than deep vertical shafts.Hence, Reason (R) is correct.Since,(R) is correct explanation of (A). Option (a) is correct.

"> MAIN tunnel and connected to the centre line of the main tunnel with cross cuts at many points.These are used in locations, where HORIZONTAL APPROACH to the centreline of the tunnel is shorter than deep vertical shaft, which will obtain additional faces for attack. The cross-section of the pilot tunnel usually measures about 2.4 m × 2.4 m.The pilot tunnel offers the following advantages:It helps in removing the muck from the main tunnel quickly.It helps in providing proper ventilation and lighting in the main tunnel.Explanation:From the above figure,It is clear that the cross cuts are provided to CONNECT pilot tunnel with main tunnel faces. Hence faces for attacking excavation and construction of tunnels are OPENED by constructing pilot tunnels.Hence, Assertion (A) is correct.As these tunnels are provided at locations when horizontal approach to the centre line of tunnel is shorter than deep vertical shafts.Hence, Reason (R) is correct.Since,(R) is correct explanation of (A). Option (a) is correct.

">
Mobile Technologies Web Technologies Digital Marketing Creative Design Career Talk Medical General Tech Interviews Internet Of Things

Embark on a journey of knowledge! Take the quiz and earn valuable credits.

Take A Quiz

Challenge yourself and boost your learning! Start the quiz now to earn credits.

Take A Quiz

Unlock your potential! Begin the quiz, answer questions, and accumulate credits along the way.

Take A Quiz

Popular Categories

All
Interview Questions
QuestionBank
Quantitative Aptitude
Engineering
Govt Exams
Digital Marketing
Management
Interviews

Assertion (A): Faces for attacking excavation and construction of tunnels are opened by constructing pilot tunnels.Reasoning (R): Pilot tunnels are suitable at locations when horizontal approach to the centre line of tunnel is shorter than deep vertical shafts.

Highway Engineering Traffic Engineering Studies Analysis in Highway Engineering 11 months ago

  737   0   0   0   0 tuteeHUB earn credit +10 pts
5 Star Rating 1 Rating

Concept:Pilot Tunnels:These tunnels are driven parallel to the MAIN tunnel and connected to the centre line of the main tunnel with cross cuts at many points.These are used in locations, where HORIZONTAL APPROACH to the centreline of the tunnel is shorter than deep vertical shaft, which will obtain additional faces for attack. The cross-section of the pilot tunnel usually measures about 2.4 m × 2.4 m.The pilot tunnel offers the following advantages:It helps in removing the muck from the main tunnel quickly.It helps in providing proper ventilation and lighting in the main tunnel.Explanation:From the above figure,It is clear that the cross cuts are provided to CONNECT pilot tunnel with main tunnel faces. Hence faces for attacking excavation and construction of tunnels are OPENED by constructing pilot tunnels.Hence, Assertion (A) is correct.As these tunnels are provided at locations when horizontal approach to the centre line of tunnel is shorter than deep vertical shafts.Hence, Reason (R) is correct.Since,(R) is correct explanation of (A). Option (a) is correct.

Previous Next

Posted on 31 Oct 2024, this text provides information on Highway Engineering related to Traffic Engineering Studies Analysis in Highway Engineering. Please note that while accuracy is prioritized, the data presented might not be entirely correct or up-to-date. This information is offered for general knowledge and informational purposes only, and should not be considered as a substitute for professional advice.

Take Quiz To Earn Credits!

Turn Your Knowledge into Earnings.

tuteehub_quiz

Tuteehub forum answer Answers

Post Answer

No matter what stage you're at in your education or career, TuteeHub will help you reach the next level that you're aiming for. Simply,Choose a subject/topic and get started in self-paced practice sessions to improve your knowledge and scores.

Explore Other Libraries

Blogs Tutorials Question Bank Feeds Careernews